View T3228D3_4194712.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Data Sheets of AVA Technology SMD Type White LED
Model : T3228D3
AVA Technology Co.
2640 S. Myrtle Ave., Suite 6 Monrovia, CA 91016, USA
P: 626-574-7726 F: 626-574-7732
http://www.led4life.com
AVA technology
1. FEATURES * * * * * * * * High intensity with small package, ideal for backlighting Wide viewing angle ( 120 ) Package Outline (LxWxH)=3.5x2.8x1.9 mm Technology : InGaN Color coordinates CIE(x,y) : (0.31,0.31) according to CIE 1931. Suitable for all SMT assembly methods Suitable for all soldering methods Delivery on 8mm tape reels
T3228D3 Top View LED with Reflector
2. APPLICATIONS * * * * * * Automotive: indoor/outdoor lighting. Signal and symbol lightings Backlighting (mobile phones, displays, PDA, Digital Camera.....) All applications in notice high intensities are required Strobe Light Channel Letter
ITEM Package Encapsulating Electrodes
MATERIALS Heat-Resistant Polymer Heat Resistance Resin Ag Plating Copper Alloy
Type T3228D3
Color of Emission White
Color of the Light Emitting Area Colored
Luminous intensity Iv (mcd) IF =20mA 2050 ~ 5000
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 1 of 14
AVA technology
3. OUTLINE DIMENSION:
T3228D3
Note: 1. Unit: mm 2. Tolerance: Dimension 0.1 / Angle 0.5
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 2 of 14
AVA technology
4. ABSOLUTE MAXIMUM RATINGS ( TA=25 ) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHz) Junction temperature Thermal Resistance (Junction to ambient) Symbol VR IF Topr Tstg Tsol PD IF(peak) Tj Rth, JA Absolute Max. Rating 5 25 -40 ~ +85 -40 ~ +100 260 (for 5 sec) 220 80 105 700
T3228D3
Unit V mA mW mA /W
5. ELECTRONIC OPTICAL CHARACTERISTICS
Parameter Chromaticity coordinate x acc. To CIE 1931 Chromaticity coordinate y acc. To CIE 1931 Viewing Angle Forward Voltage Reverse Current (Leakage current)
Symbol
Condition
Min.
Typ. Max.
Unit
x
IF=20/20/20mA
---
0.31
---
---
y 21/2 VF IR
IF=20/20/20mA IF=20/20/20mA IF=20/20/20mA VR=5/5/5V
---------
0.31 120 3.3 ---
----3.6 50
--Degree V A
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 3 of 14
AVA technology
6. LUMINOUS INTENSITY GROUPS: Luminous intensity group W4 W3 W2 W1 U4 Measurement condition Luminous intensity Iv(mcd) 4250 ~ 5000 3600 ~ 4250 3000 ~ 3600 2500 ~ 3000 2050 ~ 2500
T3228D3
IF = 20/20/20 mA
* Luminous intensity group includes 5 groups U4 to W4 * Luminous intensity is tested at a current pulse duration of 25ms and a tolerance of 10% 7. CHROMATICITY COORDINATES RANKS : 0.280 0.248 0.296 0.276 0.291 0.257 0.264 0.267 0.287 0.295 0.279 0.276 a3 b5 b7 0.287 0.295 0.307 0.315 0.302 0.302 0.296 0.276 0.311 0.294 0.308 0.279 0.287 0.295 0.311 0.294 0.308 0.279 0.283 0.307 0.307 0.315 0.302 0.302 b3 b6 b8 0.304 0.330 0.330 0.339 0.319 0.318 0.307 0.315 0.330 0.318 0.321 0.294 0.307 0.315 0.330 0.360 0.304 0.330 0.330 0.318 b4 d0 0.330 0.360 0.350 0.318 0.330 0.339 0.350 0.360 * Color rank is tested at a current pulse duration of 25ms and a tolerance of the chromaticity coordinate of 0.01 8. FORWARD VOLTAGE Bin VT1 VT2 VF(Volt) 3.00-3.40 3.40-3.60 Forward Current 20mA
* Tolerance of Forward Voltage is 0.05V
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 4 of 14
AVA technology
9. TYPICAL ELECTRO-OPTICAL CHATACTERISTIC CURVES: * Chromaticity Coordinates (CIE 1931 system)
T3228D3
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 5 of 14
AVA technology
T3228D3
* Forward Voltage vs. Forward Current @25
120 100 80
IF (mA)
Forward Current vs. Relative Luminosity@25
2 .5 2 .0
Iv (%)
1 .5 1 .0 0 .5
60 40 20
0 .0
0 1 1.5 2 2.5 3 3.5 4 4.5 5 VF (Volt)
0
20
40
60 IF (m A)
80
100 120
* Ambient Temperature vs. Allowable Forward Current
* Ambient Temperature vs. Forward Voltage@20mA
50 40
VF (Volt)
4.50 4.25 4.00 3.75 3.50 3.25 3.00 2.75
IF (mA)
30 20 10 0 0 20 40 60 80 100
2.50 -60 -40 -20 0 20 40 60 80 100 120
Ta ()
Ta ()
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 6 of 14
AVA technology
* Forward Current vs. Chromaticity diagram @ 25
0.34
5mA
T3228D3
* Spectrum @ 20mA, 25
100 80
0.33
10mA
CIE y
0.32 0.31 0.3 0.29 0.29 0.3 0.31
20mA 30mA 50mA 80mA 100mA
60 40 20 0
0.32
0.33
0.34
380
480
580
680
780
CIE x
* Ambient Temperature vs. Chromaticity Diagram @ 20mA
* Radiation Characteristic (@ 25, 20mA)
0.340
-40
0.330
CIE y
0
0.320
20
25
0.310
100
60 80
0.300 0.300
0.310 CIE x
0.320
0.330
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 7 of 14
AVA technology
10. REEL PACKAGE:
T3228D3
160 mm
400 mm
Note: 1. Unit: mm 2. 2,000 pcs / reel
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 8 of 14
AVA technology
11. SHIPPING PACKAGE:
T3228D3
AVA Technology
Part No. : T3228D3 Class : W2b5VT1 Q'ty : 2000 pcs
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 9 of 14
AVA technology
12. RELIABILITY PLAN: * The reliability of products shall be satisfied with items listed below. Confidence Level : 90 % , LTPD : 10 %
T3228D3
No 1
Test Item Solderability Room Temperature operating Room Temperature operating Low Temperature Storage High Temperature Storage Temperature Cycle High Humidity Heat
Description & Condition Tsld =2455, 10sec, Ta = 25 C IF = 20mA Ta = 25 C IF = 30mA 1 time
Sample Ac/Re size 22 0/1
Failure Criteria
2
1000 hrs
22
0/1
IV < L* 0.6 (IF: 20mA) VF > U * 1.1 (IF: 20mA) IR > U * 2.0 (VR:5V) L: Lower Spec. Level U: Upper Spec. Level
3
500 hrs
22
0/1
4
Ta = -40 C
1000 hrs
22
0/1
5
Ta = 100 C
1000 hrs
22
0/1
6
-40C ~ 25C ~ 100C ~ 25 C 100 30min 5min 30min cycles 5 min Ta = 60 C RH=90% IF = 15mA 500 hrs
22
0/1
7
22
0/1
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 10 of 14
AVA technology
13. SOLDERING CONDITIONS: (1) Recommended Re-flow profile
T3228D3
Temp. () 235 Max. 240 2.5~ 5 /sec Pre-heating 150
2.5~ 5 /sec
90
120 sec Max.
10sec
Recommended Soldering Pad
(Unit : mm)
(2) Re-flow soldering should not be done more than two times. (3) It is recommended that the user use the nitrogen reflow method. (4) When soldering, don't put stress on the LEDs during heating. (5) After soldering, don't warp the circuit board. (6) It is recommended that isopropyl alcohol (IPA) be used as a solvent for cleaning the LEDs. Doc. No. : RD-EDS-0005 Version 1.2 Date : 2006.10.04 Page: 11 of 14
AVA technology
14. CAUTIONS:
T3228D3
(1)Storage Before opening the package : The LEDs should be kept at 30 or less and 30%RH~85%RH. The LEDs should be used within a year. When storing the LEDs, moisture proof packaging with desiccant (Silica gel) is recommended. After opening the package : The LEDs should be kept at 30 or less and 30%RH~70%RH.The LEDs should be soldered within 168hours (7days) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture desiccant (Silica ge1), or reseal the moisture proof bag again. If the moisture desiccant (Silica ge1)has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the fo1lowing conditions. Baking treatment: more than 24 hours at 65. Please avoid conditions which may cause the LED to corrode, tarnish or disco1or. This corrosion or discoloration might lower solderability or might effect on optical characteristics.-Please avoid rapid transitions in ambient temperature, especially in high humidity environments where condensation can occur. Moisture Proof package When moisture is absorbed into the SMT package it may vaporize and expand during soldering. There is a possibility that this can cause exfoliation of the contacts and damage to the optical characteristics of the LEDs. For this reason, the moisture proof package is used to keep moisture to a minimum in the package. A package of a moisture desiccant (silica gel)is inserted into the moisture proof bag-The silica gel changes its color from blue to pink as it absorbs moisture. (2)Static Electricity Static electricity or surge voltage damages the LEDs. It is recommended that a wrist band or an anti-electrostatic glove and shoe be used when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to End static-damaged LEDs by a light-on test or a VF test at a lower current (below lmA). Damaged LEDs will show some unusual characteristics such as the leak current remarkably increases, the forward voltage becomes lower, or the LEDs do not light at the low current. (Criteria : VF>2.0V at IF=0.5mA.) (3)Heat Generation Please consider the heat generation of the LED when making the system design that it's very importance. The coefficient of temperature increase per input electric power is effected by the thermal resistance of the circuit board and density of LED placement on the board, and other components. It is necessary to avoid intense heat generation and operate within the maximum ratings given in this specification. The operating current should be decided after considering the ambient maximum temperature of LEDs. Doc. No. : RD-EDS-0005 Version 1.2 Date : 2006.10.04 Page: 12 of 14
AVA technology
T3228D3
(4)Others Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum rating when using the LEDs with matrix drive. The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking directly for more than a few seconds. Flashing lights have been known to cause discomfort in people; you can prevent this by taking precautions during use. Also, people should be cautious when using equipment that has had LEDs incorporated into it.
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 13 of 14
AVA technology
T3228D3
AVA TECHNOLOGY CO. MAKES NO WARRANTY, REPRESENTATION OF GUARANTEE, EXPRESS OR IMPLIED, REGARDING THE SUITABILITY OF ITS PRODUCTS FOR ANY PARTICULAR PURPOSE, NOR THAT THE USE OR APPLICATION AND SPECIFICALLY DISCLAIMS ANY AND ALL LIABILITY ARISING OUT OF ANY SUCH USE OR APPLICATION, INCLUDING BUT NOT LIMITED TO, CONSEQUENTIAL OR INCIDENTAL DAMAGES.
AVA Technology CO. are not designed, intended or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the AVA Technology Co. Product could create a situation where personal injury or death may occur.
AVA Technology CO. reserves the right to make changes to or discontinue any product or service desecribed herein without notice.
AVA technology Co.. World Wide Web http://www.led4life.com
Doc. No. : RD-EDS-0005
Version 1.2
Date : 2006.10.04
Page: 14 of 14

▲Up To Search▲

Price & Availability of T3228D3

	To Download T3228D3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .